Guidelines on Remediation of SARS Contamination

Environmental Assessment

The work area should be unoccupied. Vacating people from spaces adjacent to the work area/floor is necessary. (For Peace of Mind) The presence of contaminants should be addressed immediately. In all instances, all entry and excess to the premises should be limited to the decontaminating crew with proper safety suit, gear and full-face masks.

SARS Decontamination

The recommend process will ensure that a premise is thoroughly decontaminated to its best possible resources available in Singapore. In an emergency, Please call: 62419443 or 96693169 (24 hours) for an immediate assistance.

Our respond time is under 1 hours and decontamination depends on the size of the premises and the type of proposal you select.

HP: 90216251 (24 Hours)

 

Plan 1: SARS Suspect Only.

  1. Decontamination of premises using fogging system. All Biocide, virucide and bactericide are EPA (USA) registered.

Plan 2: SARS Confirmed.

  1. Decontamination of premises using fogging system. Wiping down all surfaces up to 6 ft with biocide, virucide and bactericide.
  2. Entire area surface is decontaminated using biocide and only disposable material is used to prevent cross contamination during surface decontamination
  3. Attached with air scrubber with UV light and HEPA system.
  4. Attached of Ozone machine.

Plan 3: Multiple SARS Cases Confirmed.

  1. All Air Handing Units in the affected floor should be turnoff to prevent short-circuiting.
  2. All entry and exit should be sealed with 0.20-mm plastic sheeting.
  3. Air Scrubber is placed with UV capability to run continuously during decontamination process.
  4. Air Blowers with plastic tubing to flush the present air out of the indoor environment to create Negative Pressure Isolation Rooms reducing short circuiting within floors/rooms thus keeping contaminants and pathogens from reaching surrounding areas.
  5. Industrial Ozone machine is place in the affected area.
  6. They will be fogged with a biocide to ensure eradication of any air borne contaminate if any.
  7. Entire area surface is decontaminated using biocide and only disposable material is used to prevent cross contamination during surface decontamination.
  8. Equipment such as particulate weight and count are running to ensure the reduction of air borne particulate.
  9. All surface are treated with Aegis anti Microbial.
  10. To decon the entire AHU with Biocide and change all disposal filter treated with anti microbial.
  11. The air-handling unit is turn on and air sterilizes.
  12. All surface are treated with Aegis anti Microbial.